J9821A Specification
Type |
HPE 5406R zl2 Switch |
Included accessories |
1 HPE 5400R zl2 Management Module (J9827A) 1 HPE 5406R zl2 Switch Fan Tray (J9831A) |
I/O ports and slots |
6 open module slots Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination |
Power supplies |
2 power supply slots 1 minimum power supply required (ordered separately) |
Fan Tray |
Includes: 1 x J9831A 1 fan tray slot |
Dimensions (W x D x H) |
17.5(w) x 17.75(d) x 6.9(h) in. (44.45 x 45.09 x 17.53 cm) (4U height) |
Weight |
24.5 lb (11.11 kg) |
Memory and processor |
|
v3 Gigabit Module |
Dual ARM® Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal |
v2 Gigabit Module |
ARM 11 @ 450 MHz; Packet buffer size: 18 MB internal |
v3 10G Module |
Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal |
v2 10G Module |
ARM 11 @ 550 MHz; Packet buffer size: 18 MB internal |
v3 40G Module |
Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB internal |
Management Module |
Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM |
Mounting and enclosure |
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); Horizontal surface mounting only |
Performance (IPv6 Ready Certified) |
|
1000 Mb Latency |
< 2.8 µs (FIFO 64-byte packets) |
10 Gbps Latency |
< 1.8 µs (FIFO 64-byte packets) |
40 Gbps Latency |
< 1.5 µs (FIFO 64-byte packets) |
Throughput |
Up to 571.4 Mpps |
Routing/Switching capacity |
960 Gbps |
Switch fabric speed |
1015 Gbps |
Routing table size |
10000 entries (IPv4), 5000 entries (IPv6) |
MAC address table size |
64000 entries |
Environment |
|
Operating temperature |
32°F to 113°F (0°C to 45°C); 0°C to 40°C with J8177C transceiver installed, 0°C to 35°C with FIPS Opacity Shield installed |
Operating relative humidity |
15% to 95% @ 113°F (45°C), noncondensing |
Nonoperating/Storage temperature |
-40°F to 158°F (-40°C to 70°C) |
Nonoperating/Storage relative humidity |
15% to 95% @ 149°F (65°C), noncondensing |
Altitude |
Up to 10,000 ft (3 km) |
Acoustic |
Power: 44 dB, Pressure: 31.7 dB ISO 7779, ISO 9296 |
Electrical characteristics |
|
Frequency |
50/60 Hz |
80plus.org Certification |
Gold |
Description |
Does not come with power supply. Two power supply slots are available; three different power supplies are available. See power supply products for additional specifications. |
Maximum heat dissipation |
2450 BTU/hr (2584 kJ/hr), (max. non-PoE); 3700 BTU/hr (3903 kJ/hr), (max. using PoE) |
Voltage |
100–127/200–240 VAC, rated |
Idle power |
(depending on power supply chosen) |
Notes |
Heat dissipation does not include heat dissipated by the PoE-powered devices themselves. |
Safety |
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950 |
Emissions |
FCC part 15 Class A; EN 55022/CISPR 22 Class A |
Immunity EN ESD Radiated EFT/Burst Surge Conducted Power frequency magnetic field Harmonics Flicker |
EN 55024, CISPR 24 IEC 61000-4-2; 4 kV CD, 8 kV AD; HPE ENV. 765.002 IEC 61000-4-3; 3 V/m IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line) IEC 61000-4-5; 1 kV/2 kV AC, 1 kV signal, 0.5 kV DC IEC 61000-4-6; 3 Vrms IEC 61000-4-8; 1 A/m, 50 or 60 Hz IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods EN 61000-3-2, IEC 61000-3-2 EN 61000-3-3, IEC 61000-3-3 |
Management |
IMC—Intelligent Management Center; Command-line interface; Web browser; Configuration menu; Out-of-band management (RJ-45 Ethernet); SNMP Manager; Out-of-band management (serial RS-232C or micro USB) AirWave Network Management |
Notes |
Supported 1G SFP transceivers are revision “B” or later (product number ends with the letter “B” or l ater; For example, J9142B, J8177C). |